Request Quote
Request a quote from Nidec Drive Technology America Corporation.
EJM 005 Frame
The EJM meets a wide range of application requirements and can support servo motors with up to 7.5kW capacity. Solid, hollow and double extended output shaft options allow for flexible machine design. The all-aluminum housing construction offers weight savings of up to 30% with improved thermal horsepower over cast iron.
The EJM series comes vent free and lubricated for life with synthetic oil, making it a reliable, maintenance-free solution. This product is ideally suited for applications within the packaging, material handling and general automation markets
Technical Data
EJM 005 Frame Size, 1 Stage Specifications
| Ratio | Unit | Note | 5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 |
| Nominal Output Torque | [Nm] | – | 81 | 88 | 90 | 100 | 101 | 109 | 105 | 94 | 91 | 85 |
| Maximum Acceleration Torque | [Nm] | – | 105 | 112 | 100 | 120 | 123 | 132 | 127 | 114 | 109 | 102 |
| Emergency Stop Torque | [Nm] | – | 162 | 176 | 180 | 200 | 202 | 218 | 210 | 188 | 182 | 170 |
| No Load Running Torque | [Nm] | *1 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 | 1.61 |
| Nominal Input Speed | [rpm] | – | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 |
| Max Continuous Input Speed | [rpm] | – | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 |
| Maximum Cyclic Input Speed | [rpm] | – | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 |
| Maximum Radial Load | [N] | *2 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 | 4,330 |
| Maximum Axial Load | [N] | *3 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 | 3,110 |
| Moment of Inertia | [kgcm2] | – | 1.83 | 1.55 | 1.45 | 1.39 | 1.36 | 1.35 | 1.34 | 1.34 | 1.33 | 1.33 |
| Efficiency | [%] | *4 | 91 | 89 | 87 | 84 | 80 | 77 | 74 | 67 | 62 | 56 |
| Torsional Rigidity | [Nm/arcmin] | – | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 | 3.1 |
| Maximum Torsional Backlash | [Arc-min] | – | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 | ≤ 23 |
| Noise Level | dB [A] | *5 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 |
| Ambient Temperature | [°C] | – | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 |
| Permitted Housing Temperature | [°C] | – | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Protection Class | – | – | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 |
| Lubrication | – | – | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil |
| Service Life | [Hours] | – | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 |
| Weight | [kg] | *6 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 | 7.3 |
- Torque at no load applied to the input shaft at 2,000 rpm
- The maximum radial load the gearbox can accept
- The maximum axial load the gearbox can accept
- The efficiency at the nominal output torque rating
- Measured with no load applied to the input shaft at 2,000 rpm
- Weight may vary slightly between models
EJM 005 Dimensions – Hollow Output Shaft
| Frame Size | Unit | Note | EJM 005 |
| L1 | [mm] | – | 86 |
| L2 | [mm] | – | 100 |
| L3 | [mm] | – | 107 |
| L4 | [mm] | – | 73 |
| L5 | [mm] | – | 37 |
| L6 | [mm] | – | 127 |
| L7 | [mm] | – | 64 |
| L8 | [mm] | – | 162 |
| L9 | [mm] | – | 58 |
| L10 | [mm] | – | 104 |
| L11 | [mm] | – | 50.0 |
| L12 | [mm] | – | 84 |
| L13 | [mm] | – | 136 |
| L14 | [mm] | – | 152 |
| L15 | [mm] | – | 38.5 |
| L16 | [mm] | – | 10 |
| D1 | [mm] | – | ø90.5 |
| D2 (H7) | [mm] | – | ø35 |
| T1 | [mm] | – | M8x12 |
| T2 | [mm] | – | M10x15 |
| *1~ | [mm] | *9 | Motor attachment dimensions are made to fit your servo motor. |
EJM 005 Dimensions – Solid Output Shaft
| Frame Size | Unit | Note | EJM 005 |
| L1 | [mm] | – | 86 |
| L2 | [mm] | – | 100 |
| L3 | [mm] | – | 156 |
| L4 | [mm] | – | 36 |
| L5 | [mm] | – | 39 |
| L6 | [mm] | – | 48 |
| L7 | [mm] | – | 28 |
| L8 | [mm] | – | 8 |
| L9 | [mm] | – | 73 |
| L10 | [mm] | – | 36.5 |
| L11 | [mm] | – | 127 |
| L12 | [mm] | – | 63.5 |
| L13 | [mm] | – | 162 |
| L14 | [mm] | – | 58 |
| L15 | [mm] | – | 104 |
| L16 | [mm] | – | 50.0 |
| L17 | [mm] | – | 84 |
| L18 | [mm] | – | 136.5 |
| L19 | [mm] | – | 152.5 |
| D1 | [mm] | – | ø90.5 |
| D2 (h6) | [mm] | – | ø25 |
| T1 | [mm] | – | M8x12 |
| T2 | [mm] | – | M10x15 |
| *1~ | [mm] | *9 | Motor attachment dimensions are made to fit your servo motor. |