Request Quote
Request a quote from Nidec Drive Technology America Corporation.
EJM 006 Frame
The EJM meets a wide range of application requirements and can support servo motors with up to 7.5kW capacity. Solid, hollow and double extended output shaft options allow for flexible machine design. The all-aluminum housing construction offers weight savings of up to 30% with improved thermal horsepower over cast iron.
The EJM series comes vent free and lubricated for life with synthetic oil, making it a reliable, maintenance-free solution. This product is ideally suited for applications within the packaging, material handling and general automation markets
Technical Data
EJM 006 Frame Size, 1 Stage Specifications
| Ratio | Unit | Note | 5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 |
| Nominal Output Torque | [Nm] | – | 133 | 144 | 145 | 165 | 168 | 183 | 175 | 158 | 150 | 142 |
| Maximum Acceleration Torque | [Nm] | – | 172 | 183 | 154 | 186 | 207 | 223 | 212 | 191 | 181 | 170 |
| Emergency Stop Torque | [Nm] | – | 266 | 288 | 290 | 330 | 336 | 366 | 350 | 316 | 300 | 284 |
| No Load Running Torque | [Nm] | *1 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 | 2.72 |
| Nominal Input Speed | [rpm] | – | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 | 2,000 |
| Max Continuous Input Speed | [rpm] | – | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 | 3,000 |
| Maximum Cyclic Input Speed | [rpm] | – | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 |
| Maximum Radial Load | [N] | *2 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 | 4,890 |
| Maximum Axial Load | [N] | *3 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 | 3,550 |
| Moment of Inertia | [kgcm2] | – | 2.61 | 2.02 | 1.81 | 1.66 | 1.61 | 1.58 | 1.57 | 1.56 | 1.55 | 1.55 |
| Efficiency | [%] | *4 | 92 | 91 | 89 | 87 | 83 | 80 | 78 | 72 | 66 | 62 |
| Torsional Rigidity | [Nm/arcmin] | – | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 | 5.6 |
| Maximum Torsional Backlash | [Arc-min] | – | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 | ≤ 20 |
| Noise Level | dB [A] | *5 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 | ≤ 80 |
| Ambient Temperature | [°C] | – | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 | -25~93 |
| Permitted Housing Temperature | [°C] | – | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Protection Class | – | – | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 | IP55 |
| Lubrication | – | – | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil | Synthetic Oil |
| Service Life | [Hours] | – | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 | 25,000 |
| Weight | [kg] | *6 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
- Torque at no load applied to the input shaft at 2,000 rpm
- The maximum radial load the gearbox can accept
- The maximum axial load the gearbox can accept
- The efficiency at the nominal output torque rating
- Measured with no load applied to the input shaft at 2,000 rpm
- Weight may vary slightly between models
EJM 006 Dimensions – Hollow Output Shaft
| Frame Size | Unit | Note | EJM 006 |
| L1 | [mm] | – | 86 |
| L2 | [mm] | – | 100 |
| L3 | [mm] | – | 108 |
| L4 | [mm] | – | 73 |
| L5 | [mm] | – | 37 |
| L6 | [mm] | – | 127 |
| L7 | [mm] | – | 64 |
| L8 | [mm] | – | 176 |
| L9 | [mm] | – | 63.5 |
| L10 | [mm] | – | 112.5 |
| L11 | [mm] | – | 60.5 |
| L12 | [mm] | – | 95 |
| L13 | [mm] | – | 147 |
| L14 | [mm] | – | 178 |
| L15 | [mm] | – | 38.5 |
| L16 | [mm] | – | 10 |
| D1 | [mm] | – | ø90.5 |
| D2 (h7) | [mm] | – | ø35 |
| T1 | [mm] | – | M8x12 |
| T2 | [mm] | – | M10x15 |
| *1~ | [mm] | *9 | Motor attachment dimensions are made to fit your servo motor. |
EJM 006 Dimensions – Solid Output Shaft
| Frame Size | Unit | Note | EJM 006 |
| L1 | [mm] | – | 86 |
| L2 | [mm] | – | 100 |
| L3 | [mm] | – | 173 |
| L4 | [mm] | – | 50 |
| L5 | [mm] | – | 55 |
| L6 | [mm] | – | 64 |
| L7 | [mm] | – | 33 |
| L8 | [mm] | – | 8 |
| L9 | [mm] | – | 73 |
| L10 | [mm] | – | 36.5 |
| L11 | [mm] | – | 127 |
| L12 | [mm] | – | 63.5 |
| L13 | [mm] | – | 176 |
| L14 | [mm] | – | 63.5 |
| L15 | [mm] | – | 112.5 |
| L16 | [mm] | – | 60.5 |
| L17 | [mm] | – | 95 |
| L18 | [mm] | – | 147.5 |
| L19 | [mm] | – | 178 |
| D1 | [mm] | – | ø90.5 |
| D2 (h6) | [mm] | – | ø30 |
| T1 | [mm] | – | M8x12 |
| T2 | [mm] | – | M10x15 |
| *1~ | [mm] | *9 | Motor attachment dimensions are made to fit your servo motor. |